Protek Softair

Showing 1-24 of 56 item(s)

Bushings Inox AA-12/SGR-12 MARUI CNC ProteK

Bushings Inox AA-12/SGR-12 MARUI CNC ProteK 2

New

Protek Softair

Bushings Inox AA-12/SGR-12 MARUI CNC ProteK

ProteK bushings are CNC-machined in stainless steel. AA-12 and SGR-12 MARUI compatible. Set includes 4 bushings to replace the plastic bushings in the gearbox.To make your replica more reliable and stronger!

Cut off lever AA-12/SGR-12 MARUI CNC ProteK

Cut off lever AA-12/SGR-12 MARUI CNC ProteK 2

New

Protek Softair

Cut off lever AA-12/SGR-12 MARUI CNC ProteK

The ProteK cut-off lever is CNC machined entirely from 7075 aluminum. The result is a part that won't break! The ProteK cut-off lever also reduces any backlash and ensures disconnection of the shooting carriage, so you're assured of a semi under all circumstances! A part that brings you reliability and performance. For MARUI model AA-12/SGR-12.

Cylinder head PGM338 Cybergun by ProteK

Cylinder head PGM338 Cybergun by ProteK 2

New

Upgrade Parts

Cylinder head PGM338 Cybergun by ProteK

The Protek cylinder head is entirely CNC machined from a 7075 aluminum block. It was made for CYBERGUN PGM 338. This part will give you a significant gain in precision and range! The dimensions of this part are very different from those of the original part, allowing you to place the bbs much more accurately in your hopup. Your bbs is immediately centered...

ProteK 1/8 NPT US stainless steel male coupling

New

Upgrade Parts

ProteK 1/8 NPT US stainless steel male coupling

-Ideal for creating an HPA supply line from a Mamba or any other line fitted with a 1/8 NPT female thread. -Ideal for converting GBBR gas magazine to HPA or replacing the coupler on your HPA adapter. -CNC machined in stainless steel. -We recommend using Teflon tape on the thread to seal when tightening. -US version (only compatible with an US HPA...

PULSE Kriss Vector KRYTAC MP5

PULSE Kriss Vector KRYTAC MP5 2

New

Protek Softair

PULSE Kriss Vector KRYTAC MP5

HPA adapter in MP5 version, for Kriss Vector Krytak. Pulse is an ergonomic HPA charger adapter. It also features a ball retention system. The MP5 version of the PULSE adapter is based on a CYMA magazine (compatible with other brands). You'll need to install your original Kriss vector Krytak magazine valve and road gas bloc on the PULSE. Guaranteed no...

Rear Cap CNC Tube Crosse MP7 MARUI GBBR ProteK

Rear Cap CNC Tube Crosse MP7 MARUI GBBR ProteK 2

New

Protek Softair

Rear Cap CNC Tube Crosse MP7 MARUI GBBR ProteK

The Rear Cap ProteK is CNC machined entirely from 7075 aluminum. High strength and finish. Allows you to attach an AEG “m4” stock tube (with central screw) for your MP7 GBBR MARUI . This part replaces MGG1-7. This custom part only allows the mounting of an AEG stock tube (with central screw). (The original stock will not be compatible). Stock tube...

Rear Cap CNC Rail MP7 MARUI GBBR

Rear Cap CNC Rail MP7 MARUI GBBR 2

New

Protek Softair

Rear Cap CNC Rail MP7 MARUI GBBR

The Rear Cap ProteK is CNC machined entirely from 7075 aluminum. High strength and finish. Allows you to mount a stock on a picatinny rail for your MP7 GBBR MARUI . This part replaces MGG1-7. This custom part is for picatinny mounting only. (The original stock will not be compatible). The Rear Cap Protek is delivered in “natural grey” color, the...

Bolt Release CNC MP7 GBBR MARUI ProteK

Bolt Release CNC MP7 GBBR MARUI ProteK 2

New

Protek Softair

Bolt Release CNC MP7 GBBR MARUI ProteK

The Bolt Release is machined from 304 stainless steel to increase the reliability of your MP7 Tokyo MARUI GBBR. This part will last a lifetime! The dimensions of the part have been specifically made by ProteK to allow a guaranteed firing stop compared to the original part. Part replacing reference MGG1-73

Enchanced Sear CNC MP7 MARUI Protek

Enchanced Sear CNC MP7 MARUI Protek 2

New

MP7 GBBR MARUI

Enchanced Sear CNC MP7 MARUI Protek

The machined 304 stainless steel sear will increase the reliability of your MP7 Tokyo MARUI GBBR. This part will last a lifetime! Part that replaces reference MGG1-64

Rear Cap CNC MP7 MARUI GBBR ProteK

Rear Cap CNC MP7 MARUI GBBR ProteK 2

New

Protek Softair

Rear Cap CNC MP7 MARUI GBBR ProteK

The Rear Cap ProteK is machined from CNC 7075 T6 aluminum. This part will make your MP7 MARUI GBBR more reliable by permanently correcting the breakage problem associated with the original part (MGG1-15). It will also lighten your replica: Rear cap ProteK: 23gr Original Rear cap: 59grIn addition to being extremely sturdy and ensuring a lifetime of...

PULSE SSQ22 MP5

PULSE SSQ22 MP5 2

New

Protek Softair

PULSE SSQ22 MP5

HPA adapter in MP5 version, for NOVRITSCH SSQ22 (ATTENTION THE ORIGINAL KC02 KJW IS NOT COMPATIBLE). Pulse is an ergonomic HPA charger adapter. It also features a bbs retention system. The MP5 version of the PULSE adapter is based on a CYMA charger (compatible with other brands). The PULSE is designed to maximize watertightness, so you can play at “low...

TDC NOVA MK23

TDC NOVA MK23 2

New

Protek Softair

TDC NOVA MK23

The TDC NOVA has been developed by ProteK to enhance the performance of your replica. This model is designed for MK23 Tokyo MARUI / STTI / ASG . The TDC NOVA provides extremely precise adjustment, thanks to its wide adjustment range and its notched metal wheel! What's more, the hardness of the thumbwheel is adjustable! You no longer need a tool to...

Tapet plate MP7 VFC AEG ProteK CNC

Tapet plate MP7 VFC AEG ProteK CNC 2

New

Protek Softair

Tapet plate MP7 VFC AEG ProteK CNC

Fully machined Tapet plate in CNC 7075 aluminum for AEG MP7 VFC. This part will correct the recurring problem of breakage on the AEG VFC MP7. You'll never have to worry about the reliability of this part again!

PULSE SAIGA 12 MARUI

PULSE SAIGA 12 MARUI 2

New

Protek Softair

PULSE SAIGA 12 MARUI

HPA adapter for M4, SAIGA 12 MARUI (all models). Pulse is an ergonomic HPA magazine adapter. It also features a ball retention system. The inclination is respected so as not to distort the SAIGA 12. Our version has been designed to improve airtightness and airflow, so you'll use far less air! The PULSE M4 adapter is based on the EPM1-S charger...

Chassis CNC MP7 MARUI GBBR ProteK

Chassis CNC MP7 MARUI GBBR ProteK 2

New

Protek Softair

Chassis CNC MP7 MARUI GBBR ProteK

Chassis (gearbox shell for the MP7 MARUI GBBR version) entirely CNC machined from 7075 aluminum. This chassis was developed (designed and machined) by ProteK to definitively correct the problem of breakage on the MARUI MP7 GBBR. The ProteK chassis also improves the fluidity of movement of the parts and reduces harmful play compared to the original...

PULSE 1911 MARUI M4

PULSE 1911 MARUI M4 2

New

Protek Softair

PULSE 1911 MARUI M4

M4 version HPA adapter, for magazine on 1911 ARMY MARUI base (custom models are compatible) for magazine with screws in the base and not in the axles). Pulse is an ergonomic HPA magazine adapter. A bbs retention system is also present. The M4 version of the PULSE adapter is based on the EPM1-S magazine (compatible with other brands). Guaranteed...

PULSE 1911 MARUI MP5

PULSE 1911 MARUI MP5 2

New

PULSE HPA Adapter

PULSE 1911 MARUI MP5

MP5 version HPA adapter, for magazine on 1911 MARUI base (custom models are compatible) for magazine with screws in the base and not in the axles). Pulse is an ergonomic HPA magazine adapter. A bbs retention system is also present. The Mp5 version of the PULSE adapter is based on the CYMA magazine (compatible with other brands). Guaranteed without...

PULSE 1911 ARMY ARMAMENT M4

PULSE 1911 ARMY ARMAMENT M4 2

New

Protek Softair

PULSE 1911 ARMY ARMAMENT M4

M4 version HPA adapter, for magazine on 1911 ARMY ARMAMENT base (custom models are compatible) for magazine with screws in the base and not in the axles). Pulse is an ergonomic HPA magazine adapter. A bbs retention system is also present. The M4 version of the PULSE adapter is based on the EPM1-S magazine (compatible with other brands). Guaranteed...

PULSE 1911 ARMY ARMAMENT MP5

PULSE 1911 ARMY ARMAMENT MP5 2

New

Protek Softair

PULSE 1911 ARMY ARMAMENT MP5

MP5 version HPA adapter, for magazine on 1911 ARMY ARMAMENT base (custom models are compatible) for magazine with screws in the base and not in the axles). Pulse is an ergonomic HPA magazine adapter. A bbs retention system is also present. The Mp5 version of the PULSE adapter is based on the CYMA magazine (compatible with other brands). Guaranteed...

PULSE DETONICS 45 M4

PULSE DETONICS 45 M4 2

New

Protek Softair

PULSE DETONICS 45 M4

HPA adapter in M4 bent version for DETONIS 45 ARMY ARMAMENT. Pulse is an ergonomic HPA magazine adapter. A bbs retention system is also present. The M4 version of the PULSE adapter is based on the EPM1-S magazine (compatible with other brands). Guaranteed without any misfeed and no air leak ! Ultra easy and simple assembly - 2 minutes ! (each PULSE...

PULSE DETONICS 45 MP5

PULSE DETONICS 45 MP5 2

New

Protek Softair

PULSE DETONICS 45 MP5

HPA adapter in MP5 version for DETONICS 45 ARMY ARMAMENT magazine. Pulse is an ergonomic HPA magazine adapter. A bbs retention system is also present. The M4 version of the PULSE adapter is based on the CYMA magazine (compatible with other brands). Guaranteed without any misfeed and no air leak ! Ultra easy and simple assembly - 2 minutes ! (each...

Stock adapter for PP2K MODIFY

Stock adapter for PP2K MODIFY 2

New

Protek Softair

Stock adapter for PP2K MODIFY

Stock adapter for PP2K MODIFY Machined entirely from 7075 aluminium, this part is extremely robust and well finished. It enables the stock to be mounted on the rail. Extremely quick and easy to fit. Fixings and parts included (stock not included).

ProteK Impact Hammer Kriss VECTOR KWA

ProteK Impact Hammer Kriss VECTOR KWA 2

New

Upgrade Parts

ProteK Impact Hammer Kriss VECTOR KWA

ProteK offers its Impact Hammer for Kriss VECTOR KWA GBBR, entirely CNC-machined in stainless steel, this part will bring you reliability and solidity!

ProteK 1/8 NPT EU stainless steel male coupling

New

Upgrade Parts

ProteK 1/8 NPT EU stainless steel male coupling

-Ideal for creating an HPA supply line from a Mamba or any other line fitted with a 1/8 NPT female thread. -Ideal for converting GBBR gas magazine to HPA or replacing the coupler on your HPA adapter. -CNC machined in stainless steel. -We recommend using Teflon tape on the thread to seal when tightening. -EU version (only compatible with an EU HPA...

Do not show again.

The site has a new look :)

To celebrate. Take advantage of 10% off the WHOLE SITE!

The soft-tech team.

This site uses cookies to help us improve your browsing experience.